Introduction

Tiling a bathroom can seem like a daunting task, but with the right tools and a little know-how, you can achieve professional results. Whether you’re updating an old bathroom or finishing a new one, this step-by-step guide will help you through the process.

Materials Needed

• Tiles

• Tile adhesive

• Tile spacers

• Grout

• Sealant

• Tile cutter or wet saw

• Notched trowel

• Level

• Sponge

• Bucket

• Tape measure

• Pencil

Steps

1. Prepare the Surface

   • Ensure the surface is clean, dry, and level. Remove any old tiles and repair any damage.

   • Apply a primer if necessary to help the adhesive bond better.

2. Plan Your Layout

   • Measure the area to be tiled and plan your layout. Dry lay the tiles to see how they fit and make any necessary adjustments.

   • Use tile spacers to ensure even gaps between tiles.

3. Apply the Adhesive

   • Mix the tile adhesive according to the manufacturer’s instructions.

   • Using a notched trowel, spread the adhesive on a small section of the wall or floor.

   • Comb the adhesive with the trowel to create ridges, ensuring an even application.

4. Lay the Tiles

   • Press the tiles firmly into the adhesive, using spacers to maintain even gaps.

   • Continue this process, working in small sections to prevent the adhesive from drying out.

5. Cut Tiles to Fit

   • Use a tile cutter or wet saw to cut tiles to fit around edges, fixtures, or corners.

   • Wear safety goggles and gloves when cutting tiles to protect yourself.

6. Let the Adhesive Set

   • Allow the adhesive to set for the time specified by the manufacturer, usually 24 hours.

7. Grout the Tiles

   • Mix the grout according to the manufacturer’s instructions.

   • Remove the tile spacers and apply the grout using a rubber float, pressing it into the gaps between the tiles.

   • Wipe away excess grout with a damp sponge before it dries.

8. Seal the Grout

   • Once the grout has dried, apply a grout sealer to protect it from moisture and staining.

9. Final Clean-Up

   • Clean the tiles with a damp cloth to remove any remaining grout haze.

   • Allow everything to dry completely before using the bathroom.

Conclusion

Tiling a bathroom requires patience and precision, but with careful planning and execution, you can achieve a beautiful and durable finish. Remember to take your time, follow the steps carefully, and soon you'll have a professionally tiled bathroom that you can be proud of.